cancel
Showing results for 
Search instead for 
Did you mean: 
GoodMew
New Member
New Member

Help! Is this a bad fuser? Or what?

Jump to solution
Operating System: Not Applicable

Hello, I need to identify the issue with this printer. About 1/4 of the top of every page is very faded and blotchy, which is particularly noticeable on solid color fills. Also about 1 inch at the bottom of solid color pages is faded. This is on every color, every print. I have run all tests and calibrations for color and paper. I have gone through all of the cleaning and maintenance steps. At this point, it must be a failing component.

I just need confirmation on if this looks like a bad fuser, or imaging unit, or a combination of things?20201204_120854.jpg20201204_120827.jpg20201204_120815.jpg

 

 

 

 

 

 

<a href="https://ibb.co/wQVBYgf"><img src="https://i.ibb.co/6tzrNwk/20201204-120815.jpg" alt="20201204-120815" border="0"></a>
<a href="https://ibb.co/rkDxPYj"><img src="https://i.ibb.co/kKN4nj7/20201204-120827.jpg" alt="20201204-120827" border="0"></a>
<a href="https://ibb.co/sHhK5p5"><img src="https://i.ibb.co/PQRcTsT/20201204-120854.jpg" alt="20201204-120854" border="0"></a>

https://i.ibb.co/6tzrNwk/20201204-120815.jpg

https://i.ibb.co/kKN4nj7/20201204-120827.jpg

https://i.ibb.co/PQRcTsT/20201204-120854.jpg

I don't know if these images are posting, I've tried adding them 3 different ways. 

0 Kudos
2 Replies
gabiene
Valued Advisor
Valued Advisor

Re: Help! Is this a bad fuser? Or what?

Jump to solution

Hi,

Your problem is from the IBT unit (transfer belt assy) and not from the fuser.

 

Gabi

GoodMew
New Member
New Member

Re: Help! Is this a bad fuser? Or what?

Jump to solution
Thank you so much Gabi! I will attempt to clean or replace the IBT unit.
0 Kudos