cancel
Showing results for 
Search instead for 
Did you mean: 
cherkcom New Member
New Member

How to Disable Configuration Report at Start Up on USB-Connected WorkCentre 3335

Product Name: WorkCentre 3335/3345
Operating System: Windows 10

Subject pretty much says it all.  How can I disable the Configuration report on start-up on my WorkCentre 3335, which is connected to my computer vis USB?

0 Kudos
7 Replies
Mohammad_armouti Contributor
Contributor

Re: How to Disable Configuration Report at Start Up on USB-Connected WorkCentre 3335

Hi,
Once is your machine is connected via USB it easier to disable the report through the control panel so login as admin then go to the machine status button then to Tools >Device settings >System configuration> select No
Regards,
cherkcom New Member
New Member

Re: How to Disable Configuration Report at Start Up on USB-Connected WorkCentre 3335

I don't have a Tools menu item under Machine Status.  I do have Device Settings under Machine Status, but there is no System Configuration menu item under Device Settings.  This is the Device Settinge menu structure:

Device Settings

 * General

   * Power Saver Timer

   * Time Zone, Date, Time

   * Language/Keyboard Selection

   * Altitude Adjustment

   * Audio Tones

   * Special Feature Options (SFO)

* Tests & Resets

   * User Ineterface Test

   * Print Test Pattern

* Timers

   * System Timeout

   * Delete Held Job After

* Supplies

   * Feed Rollers Counter Reset

   * Document Feed Pad Counter Reset

   * Bias Transer Roller Counter Reset

* Tray Confirmation Screens

* Display Brightness

I've looked under every menu item I can find with no luck.

0 Kudos
Mohammad_armouti Contributor
Contributor

Re: How to Disable Configuration Report at Start Up on USB-Connected WorkCentre 3335


As i said again the first step of the procedures is to login as admin

To login as admin
1. At the printer control panel, press the Log In/Out button.
2. Type admin and touch Next.
3. Type the administrator password, then touch Done. The default password is 1111

then go to the machine status button then touchTools tab >Device settings >System configuration> select No
Regards,
cherkcom New Member
New Member

Re: How to Disable Configuration Report at Start Up on USB-Connected WorkCentre 3335

Thanks, but I did log in as administrstor, and the menu structure I mentioned in my previous reply is what I got.  There is no "System Configuration" menu item under "Device Settings".

I have system software Version 60.002.01.000, Main Controller V2.50.02.01, User Interface V5.51.00.31.00_17030801, if that helps at all.

0 Kudos
gabiene Occasional Advisor
Occasional Advisor

Re: How to Disable Configuration Report at Start Up on USB-Connected WorkCentre 3335

Hi,

To disable Start-Up Page go to CWIS>Properties>Services>Printing>Device Start-Up Page and disable from there.

 

Gabi

0 Kudos
cherkcom New Member
New Member

Re: How to Disable Configuration Report at Start Up on USB-Connected WorkCentre 3335

Thanks, but this is not a networked printer, so I can't use CWIS.  As I mentioned in the subject this is a USB-connected printer.

0 Kudos
gabiene Occasional Advisor
Occasional Advisor

Re: How to Disable Configuration Report at Start Up on USB-Connected WorkCentre 3335

Sorry, but it can be disabled just from there

0 Kudos