cancel
Showing results for 
Search instead for 
Did you mean: 
AmericanPrinting New Member
New Member

How to print tabs on C75 Press

I'm trying to print tabs on a C75 Press using the Bypass Tray.  The Tab sheets are 9 x 11 including the tabs (obviously they are only the extra half inch wide in a small space where each tab is - these tabs are 1.5" wide).  When I choose the size as 9 x 11 and the paper type as Tab Stock, I get an error message saying for Tab Stock you have to use A4 or 8.5 x 11.  But when I use 8.5 x 11, my 9 x 11 document won't print because they're different sizes.  If I make my document 8.5 x 11, the tabs print in the wrong place.

 

How is this supposed to work?

 

I tried working around it by calling the paper Hole Punched, but then it jams and crumples up when going into the Finisher (we have a bookletmaker finisher).  The tabs get all beat up and sometimes torn.

 

Thoughts?  My client's project is due in a half hour!

0 Kudos
3 Replies
Community Manager CherylO-Xerox
Community Manager

Re: How to print tabs on C75 Press

Hi American Printing,

Thank you for using the Support Forum. Please make sure you are loading the tabs correctly.  You need to make sure that you have confirmed to the screen that tabs are loaded in the tray. If you continue to have issues with printing tabs please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos
Analyst Nation Moderator Joe053204-hcl
Analyst Nation Moderator

Re: How to print tabs on C75 Press

On the printer you put it as 8.5*11 Tab stock.

In the driver/application it is whatever it allows .

 

Exact steps depend on the DFE, which would be the FFPS or the Fiery. For the FFPS it's simple as possible, you just choose whatever it says in Loaded stocks.(White Pre-Cut tab usually) and it won't give a resource issue.

 

2.GIF

 

For the Fiery you just choose tabs and it will fill in the size automagically, just make  sure you set the weight to whatever you did on the 75.

Capture.GIF

 

 

 

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe
0 Kudos
DebbieJ New Member
New Member

Re: How to print tabs on C75 Press

Place tabs in Bypass Tray (Tray 5) with tabs facing up in the tray.

In the Fiery Menu . . . Make your Document size: 9 x 11 Landscape. Change your Paper size: 8.5 x 11 Tab LEF.

The Fiery will automatically change the Media stock to Tab stock and Media weight to 106-128 gsm.

To print 5 tabs, click on current page and make 5 copies for one set.

0 Kudos