cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
ffffffrabbit New Member
New Member

IPP Xerox WorkCentre M128 Constant Pause

am absolutely frustrated. I just got off the phone with Xerox and it will cost $377 to come and set up the office iMacs to our Xerox WorkCentre M128.

I downloaded, from Xerox the drivers. Added the printer >>

Protocol: IPP
Address: 192.168.1.**
Queue: <left blank>
Name: 192.168.1.**
Location: <left blank>
Print Using: Xerox WorCenter M128 v3015.103 PS

The printer is paused. It will not un-pause.

I tried used LPD and HP Jetdirect but I just end up with the first sheet prining %! PS-Adobe-3.0 %%LanguageLevel:1 %% DocumentDate: Clean7Bit %%DocumentSuppliedResou (it ends here) with multiple sheets of blank paper to follow.

Note: Appletalk is not available.

Please Help!

I would like to know two things:

 

  1. How to get to print from an iMac intel
  2. How to activate Appletalk
0 Kudos
1 Reply
Fabio Valued Advisor
Valued Advisor

Re: IPP Xerox WorkCentre M128 Constant Pause

hello,

 

i am not sure about this machine , but with other machine if you go to :

system tools , network setup , port setup , there you can enable appletalk or bonjour

 

Also check if you have a post script module , this is an optional hardware module to enable printing from mac. Default a machine is only equiped with pcl printing and NOT PS

So you need that module for printing from mac

 

Print a configuration report (6 pages) , on each page there must be an adobe icon present below.

Or check the system version

if its something like Rom version 1.123.3 , then you dont have a PS , if it is something like 1.123.3 + PS

then you are fine :)

 

Grtz

0 Kudos