cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

J75 - Tips Printing Label Stock

Good Moring All,

 

Does anyone have tips when printing on heavier label stock (more than 120 gsm) on J75 printers? We are getting jamming and poor print quality due to the fuser melting the adhesive. I know there is a "label" setting but this doesn't seem to help the problem.

 

Kind Regards,

 

QCSgraphics

0 Kudos
3 Replies
Valued Advisor
Valued Advisor

Re: J75 - Tips Printing Label Stock

If the fuser is melting the adhesive, it is not a stock that should be in the machine.

The labels designed for high heat, high speed printers won't do that.

Your only option is to adjust the weight and stock as programmed in the tray to get as close to a usable setting as you can.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos
Highlighted
New Member
New Member

Re: J75 - Tips Printing Label Stock

Thank you for your help we appreciate it!

0 Kudos
Highlighted
New Member
New Member

Re: J75 - Tips Printing Label Stock

This is page helps a person to understand the reason behing jamming of the printer. Replies help a person to understand the reason properly.

0 Kudos