cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Valued Member
Valued Member

Overhang on Booklets

Product Name: Xerox Color C75 EFI Fiery Controller
Operating System: Windows 7

Hi there I been getting overhang on Booklets. 

Like the staple don't happen in the exact centre and and one hald=f over hangs the other

Don't know if the photos are clear enough 

0 Kudos
3 Replies
Valued Advisor
Valued Advisor

Re: Overhang on Booklets

The finisher folder is out of alignment

Log on to the C75 as admin and go to Machine Status > Tools > Common Service Settings > Maintenance > Finisher Adjustment > Adjust Fold Position

 

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos
Highlighted
Valued Member
Valued Member

Re: Overhang on Booklets

Thanks but no luck as I don't see an exact setting to stop this from happening. 

0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: Overhang on Booklets

Then I guess you will need a technician then because the settings are certainly not optional, so if there is no setting on yours to do a booklet fold adjustment then a tech will be needed to entire wipe the device, load the firmware again to get the option and then follow through with the adjustments

1.JPG2.JPG3.JPG

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos