cancel
Showing results for 
Search instead for 
Did you mean: 
mikeflowers New Member
New Member

PHASER 6600 PRINTING TRAY SHOWS EMPTY

So I had a paper jam and correctly removed the paper.  I have reloaded the tray, powered off the printer multiple times, double and tripled check the tray and regardless of what I do the printer shows a message stating "Load Tray"?

Any suggestions on how to reset or fix the error?

0 Kudos
5 Replies
Antonios_Hellas New Member
New Member

Re: PHASER 6600 PRINTING TRAY SHOWS EMPTY

the empty tray actuator sensor has broken.

0 Kudos
Highlighted
yvonne3 New Member
New Member

Re: PHASER 6600 PRINTING TRAY SHOWS EMPTY

I'm having the same issue. Is the sensor replaceable?

0 Kudos
Antonios_Hellas New Member
New Member

Re: PHASER 6600 PRINTING TRAY SHOWS EMPTY

yes it is p/n 120e33762

0 Kudos
molinka New Member
New Member

Re: PHASER 6600 PRINTING TRAY SHOWS EMPTY

yes my phaser 6600 have this problem . i search the net and found some solution for his in کلید زیبایی shows that this problem may be from their software. go to mechanik enginier and ask them to روغن سیاه دانه maybe ur problem solve.
0 Kudos
Mohammad_armouti Frequent Contributor
Frequent Contributor

Re: PHASER 6600 PRINTING TRAY SHOWS EMPTY

Hi

this actuater might be broken  ,you can check it so easly ,if not the sensor is blocked or the roller could be seized 120e33761.jpg

 

 

 

0 Kudos