Phaser 3260 PCL5 problems

[mariovaisman]

It is impossible to work with PCL5 included in the file to print. With other phaser models as 4510 and 3250, all is working properly, but with this equipment, it is like the printer only recognize letter papers, I selected A4 and the printer skip to next page before the end of the line, and it doesn't occur with the other models. When I tried to print in landscape with legal papers, it printed up to the size of letter, and nothing at the right side. The same file in the other printers work perfect, also with other printers from different manufaturers. 

How I can solve this situation, I downloaded and insntalled the last available firmare V3.50.01 11 JUL-15-2015.

Please let me know what to do to solve this issue.

Thanks

Mario Vaisman

[CherylO-Xerox]

Hi mariovalsman,

Thank you for using the Support Forum. Please take a look a the solution for setting up paper size and type.  Make sure you have the size set properly for the size you are using.  if the problem continues please consider contacting your support centre for further assistance.

[Joe Arseneau]

The 3260 only emulates PCL5.

You might get up and running by using the PDL guide from these machines.

There is not, as far as I can see, any PDL guide for the 3260 itself.