cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Phaser 6130 fuser temperature

I get no errors, but clearly the fuser is not getting to the required temperature as the toner, where fairly thick, isn't properly fused to the paper.

 

Can I adjust the fuser temperature on this printer?  If so how?

 

 

0 Kudos
2 Replies
Highlighted
Community Manager
Community Manager

Re: Phaser 6130 fuser temperature

Hi mikexx,

Thank you for using the Support Forum. Please take a look at the solutions for the toner smears and see if any of these solutions will help.  If not please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos
New Member
New Member

Re: Phaser 6130 fuser temperature

Many thanks.

 

However, there is nothing in any of the recommendations to alter fuser temperature, just to replace if it might not be functioning properly, which seems rather extreme!!

 

I'm not getting smears, I'm getting sufficiently a sufficiently thick layer of toner on the paper that it starts to break up and fall off in small peices.

 

If I try to print double sided the effect is made worse with more toner falling off.

 

0 Kudos