Phaser 6280 - Ink Streaking Help

[floodlightdesign]

I replaced the fuser and checked the paper type setting. The paper type was set to Labels. I have no idea why. When I changed it to plain paper it started working perfectly.

Joe

[CherylO-Xerox · Accepted solution]

Hi,

Thank you for using the Support Forum. Please make sure you are using paper within specs for your machine and that you are setting the type of paper correctly on the machine. 

[JostH]

Hello,

I have an almost identical problem. Ink pealing off where there's to much ink buildup. B/W text prints just fine... I replaced the fuser and the problem still persists. I posted the same problem on this forum.

I don't want to discourage you, but the fuser is an expensive part...

[floodlightdesign]

Great thanks - I will try that.

[v.andreev]

Hi,

I suggest you to change the fuser.

[floodlightdesign]

I've replaced all toner and am getting strange streaking of any solid blocks of ink.

Text prints just fine, but all blocks of ink (even black) end up "peeling" off the page. 

Any help on how to fix?

Thanks,

Joe