cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Phaser 6280DN strange colour 'streaks'

Jump to solution

I just replaced two cartridges, cyan and magenta, and am now getting some strange cyan and magenta 'ticking' on pages printing with colour. I have been troubleshooting for a couple hours now. I do not have back-up cartridges to test with but I'm not sure how this would be an issue with both cartridges. Any help would be appreciated.

 

These are horizontal dashed 'lines', the dashes are about 1cm long and 1.5cm apart. I have an attached an image, hopefully the lines are visible.

 

Thank you.

Colour lines

0 Kudos
12 Replies
Highlighted
New Member
New Member

Re: Phaser 6280DN strange colour 'streaks'

Jump to solution

Your issues sound very similar to the problem I am having except mine are all one color (red) - see pattern printing entry near yours.  I replaced my yellow cartridge possibly around the time my issue started.  Are you using refilled cartridges or new?  A friend suggested the refilled cartridges may be the issue.

0 Kudos
Highlighted
New Member
New Member

Re: Phaser 6280DN strange colour 'streaks'

Jump to solution

I am using new cartridges.

 

Wow. Your issue does sound just like mine!

0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: Phaser 6280DN strange colour 'streaks'

Jump to solution

Heya!

 

Here is the measurements for repeating defects on this machine:

(I would say it has to do with the Print Cartridge)

 

Namnlös.png

 

Thanks!


--------------------------------------------
Please remember to select "Accept as Solution" for posts that helped you solve the issue.

 

Highlighted
New Member
New Member

Re: Phaser 6280DN strange colour 'streaks'

Jump to solution

Your image is not showing up for me! Could you repost or provide a link to the image?

 

Thank you.

0 Kudos
Highlighted
Account Deactivated

Re: Phaser 6280DN strange colour 'streaks'

Jump to solution

synergy,

Check now to see if the image is visible for you.

 

 

Please select "Accept Solution" and / or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!
Thanks,
SandyP-Xerox
Moderator
Highlighted
New Member
New Member

Re: Phaser 6280DN strange colour 'streaks'

Jump to solution

Yes, I can see the image now. Thank you.

 

The pattern repeats every 25mm, so I am assuming that I'm looking at a print cartridge issue. Either the "Sleeve (Y, M, C) or the "BCR Cleaner Roll" could be the culprit according to the intervals.

 

Thank you for your help.

Highlighted
New Member
New Member

Re: Phaser 6280DN strange colour 'streaks'

Jump to solution

@synergy: did you have any luck fixing this problem? If yes, what parts did you clean or replace?

0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: Phaser 6280DN strange colour 'streaks'

Jump to solution

Hi, edwaa.

 

I suggest you do the same, look at my image provided in the tread and measure the distance between the defect.

It can be more than one part depending on your problem.

 

Best Regards

Kimzi

 


--------------------------------------------
Please remember to select "Accept as Solution" for posts that helped you solve the issue.

Re: Phaser 6280DN strange colour 'streaks'

Jump to solution

Did this turn out to be a printer cartridge problem? I am exeriencing the same problem....

 

Thanks,

 

Mark

0 Kudos