cancel
Showing results for 
Search instead for 
Did you mean: 
llowrey0 New Member
New Member

Phaser 6510/DN Powers up every 24 hours

Product Name: Phaser 6510/DN
Operating System: Windows 10 x64

My Phaser 6510/DN powers up every 24 hours then powers off after the idle timeout. It happens at ~8:40pm every evening. The nosie is very distracting.

Is there any way to disable this behavior?

0 Kudos
4 Replies
gabiene Occasional Advisor
Occasional Advisor

Re: Phaser 6510/DN Powers up every 24 hours

Hi,

Check the User Guide http://download.support.xerox.com/pub/docs/6510/userdocs/any-os/en_GB/Phaser_6510_sfp_ug_en-us.pdf (Page 164 - Configuring Power Saver Mode).

 

Gabi

0 Kudos
llowrey0 New Member
New Member

Re: Phaser 6510/DN Powers up every 24 hours

Thanks the for reply.

The section you referenced configures how the printer powers down. That is not my problem.

The problem I have is the printer turns itself ON every 24 hours.

Every evening around 8:40pm it powers on, makes a bunch of noise like it's about to print something, but doesn't. It idles for a couple of minues then powers back down.

This is extremely annoying. The printer should only power on when I send a print job to it.

0 Kudos
Analyst Nation Moderator Joe053204-xrx
Analyst Nation Moderator

Re: Phaser 6510/DN Powers up every 24 hours

It wakes to submit reads and supplies, though typically around midnight, but my guess is the time is just wrong on the printer.

 

In any case, disable this, or change the time it tries it, if this changes the time it wakes, or stops in completely, you will know why it happens (Set it to noon and you won't notice)

1.JPG

2.JPG

 

3.JPG

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe.
0 Kudos
Brittanie455 New Member
New Member

Re: Phaser 6510/DN Powers up every 24 hours


@llowrey0 wrote:

Thanks the for reply.

The section you referenced configures how the printer powers down. That is not my problem.

The problem I have is the printer turns itself ON every 24 hours.

Every evening around 8:40pm it powers on, kroger feedback makes a bunch of noise like it's about to print something, but doesn't. It idles for a couple of minues then powers back down.

This is extremely annoying. The printer should only my bk experience power on when I send a print job to it.


Did you get any proper solution for this?

0 Kudos