Phaser 6510 puking toner waste inside printer

[IamCraiger · Accepted solution]

I fixed this by building one Frankenphaser out of combining parts out of two failing Phaser 6510's.

In this case I replaced the entire P/R assembly that had the toner puke all over it. This solved the problem.

[IamCraiger]

Thanks, I will weigh a service call vs replacing the printer

[CathyO-Xerox]

Hello IamCraiger,

This issue may require an onsite service call. Here is the latest article from our Support Page on the issue.

[IamCraiger]

Hi, my Phaser 6510 is not ejecting toner waste properly into the waste toner container.  The used toner residue is dumping inside the printer (see pic), creating terrible image quality issues.  I have tried swapping out with a brand new waste toner container but have same result.  

Any help appreciated, thanks

Toner puke