cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
zhiv9 New Member
New Member

Phaser 6600 doesn't print custom sizes properly

Jump to solution

I have setup the page and printer to print a custom size (4x6) per the instructions in them manual and online here:

 

http://www.support.xerox.com/support/phaser-6600/support/enus.html?objGUID=2444

 

Everything looks fine in the preview on the Mac side, but the printer prints the document in a little tiny square in one corner of the customer page.  This is the same unresolved issue experienced by this user: http://forum.support.xerox.com/t5/Printing/Save-my-sanity-custom-template-for-a-xerox-phaser-6600/m-...

 

I have tried printing from different programs, but the results are always the same.  When printing one of the selectable standard sizes, the printer prints fine.

 

 

Tags (3)
0 Kudos
15 Replies
Analyst Nation Moderator Joe053204-hcl
Analyst Nation Moderator

Re: Phaser 6600 doesn't print custom sizes properly

Jump to solution

That happens if you select the "Choose paper source by pdf page size" in Acrobat/Reader, I have never seen it happen without that variable enabled.

 

Is this with the Apple supplied Generic PS ppd or the Apple supplied version 3.51.0 6600 driver, or the Xerox.com downloadable 3.64.0 (1572) driver ?

 

And what OSX version do you have running?

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe
0 Kudos
zhiv9 New Member
New Member

Re: Phaser 6600 doesn't print custom sizes properly

Jump to solution

It happens regardless of that setting in Acrobat Reader and it also happens when printing from Preview or Inkscape.  If I keep adjusting the custom width upwards it starts to properly respond to the custom size around the 200mm width.

 

I am running El Capitan and the downloadable Xerox 3.64.0 driver.

0 Kudos
Analyst Nation Moderator Joe053204-hcl
Analyst Nation Moderator

Re: Phaser 6600 doesn't print custom sizes properly

Jump to solution

I apologize, I have been trying to find a 6600 on the LAN to run some tests and have failed miserably for an hour.

I have some feelers out to colleagues to find one for me to test on, I will update here if I can find one, with my findings.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe
0 Kudos
zhiv9 New Member
New Member

Re: Phaser 6600 doesn't print custom sizes properly

Jump to solution
Any help would be greatly appreciated. Thanks!
0 Kudos
plantgoodseed New Member
New Member

Phaser 6600 doesn't print custom sizes properly

Jump to solution

I use a Xerox Phaser 6600 to print custom size envelopes, and i had a workflow set up whereby i regularly printed the envelopes from the InDesign files. I use the bypass tray on the printer, and had very precise alignments and envelope sizes. The setup worked flawlessly for years until the printer itself broke. I recently replaced the printer with the exact same model, which necessitated installing a new driver for the printer. Today when i attempted to replicate the workflow with the new driver in Indesign, the printouts come out the size of a postage stamp on the upper right corner on the envelope, whereas before, i obviously had a full sized print fully in line with the size of the envelope. I'm really confused – i've set the document size in InDesign and let InDesign control the document size with the printer – i've checked if any settings are different from the previous printer driver, and can't find a single one – and yet what i get is a postage size stamp mini printout. I thought it might be an issue to InDesign specifically, but when I exported a PDF file of the document and printed it out using OS X preview and i got the same issue. Have i missed something obvious? Enclosed are screenshots of the printing settings, the document size settings, and the OS X custom page size i used in preview.

indesign printing problem.png

seed envelope size printing problem.png

When attempting to print via the bypass tray in Apple's preview app, here's the envelope size i dictated:

pdf print dialog.png

 

Would really appreciate anyone's insight to this problem. My business relies on this envelope workflow so i'm kind of in a tight spot until i debug this issue. I'm using the latest version of InDesign and OS X – and the latest version of the printer driver that Xerox provides. The only issue I can think of that's different between the newer printer and the old one that just broke is that the older one was using an older version of the printer driver.

Thanks a lot,

Quin

0 Kudos
plantgoodseed New Member
New Member

Re: Phaser 6600 doesn't print custom sizes properly

Jump to solution

Hey, I'm having this same problem / i just posted it as a separate thread: http://forum.support.xerox.com/t5/Printing/Phaser-6600-doesn-t-print-custom-sizes-properly/m-p/18476...

 

but this is definitely a problem that Xerox needs to identify or provide a workaround with ASAP. What i can add to this thread is that it the problem doesn't occur with the older version of the printer driver running on OS X El Capitan; i just replaced my old Phaser 6600 with a new one, and had to install the newest printer driver, and i basically am having problems with only the newer printer driver. The old one worked fine, and i wished the old printer were still working so i could have my printing setup back. In the meantime, I'm out in the dark.

 

-Quin

 

NOTE From Xerox Moderator - I have moved his seperate thread to this thread to keep them in the same conversation. (Date 12/31/15, time 9:45 PST)

0 Kudos
Account Deactivated

Re: Phaser 6600 doesn't print custom sizes properly

Jump to solution

Hi plantgoodseed.
I would like to ask you what version driver are you using and what print quality mode are you set too? That may help us to troubleshoot the issue.

 

I am also going to move your other post under this one so that we can keep them together.  It helps to have all the conversations in one discussion.

 

 

Please select "Accept Solution" and / or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!
Thanks,
SandyP-Xerox
Moderator
0 Kudos
plantgoodseed New Member
New Member

Re: Phaser 6600 doesn't print custom sizes properly

Jump to solution

Sandy,

I am using 3.64.0 version of the Xerox print driver. I wish i had known what older version of the print driver i had with the printer that just broke, but it seems when i added the new printer it upgraded *both* printer drivers

 

Is there a way that i can access older software to attempt to see if it truly is the new print driver? It's the only thing i can think of.

 

thx,

Quindriver.png

0 Kudos
plantgoodseed New Member
New Member

Re: Phaser 6600 doesn't print custom sizes properly

Jump to solution

Oh,also, I was using "Enchanced" mode for print quality.

0 Kudos