cancel
Showing results for 
Search instead for 
Did you mean: 
rmbennett New Member
New Member

Phaser 8400 using non standard paper

I formatted a letter in Word 2007 for custom size paper that is 6.25 x 9.25. I am sure that the 6.25 measurement was entered as the width, and that the orientation is portrait. However, in printing to tray 1 (top), an error message keeps asking for 9.25 paper. I have not been able to solve this. Can anyone offer a suggestion please?

0 Kudos
1 Reply
Xerox Employee JohnM-Xerox
Xerox Employee

Re: Phaser 8400 using non standard paper

Hello rmbennett,

 

Make sure that the paper guides are touching the edges of the paper in tray 1.  Also, make sure that you have set the paper size and type at the printer. (I know that you have it set up in the driver but I'm not sure you have it setup in the printer which is why the printer could be asking for that size paper.)

 

After loading the media in tray 1, the printer will display a size and type based on paper guide placement and previous paper type setting. If this is correct press OK. If not, scroll to change and press OK; select the correct paper type and size, then press OK.

 

I hope this helps, but if it doesn't, please post back and let us know.

John

0 Kudos