Is there any solution to this poor quality printing?
Which component causes this gray backgrounding?
I have cleaned the drum, and the ibt cleaner.
The fuser is clean.
The developer blade distance is about 0.75mm.
Is it possible, that the Black developer unit is too close to the ibt?
There is about 8mm misaligment when printing.
How can I calibrate this slip?
Many Thanks for answers!
Hi forelli 12,
Thank you for using the Support Forum. Please take a look at the steps for performing a calibration. Please also take a look at the article about uneven image density and try the suggested steps will help with your image quality issue. Please consider contacting your support centre for further assistance.