Printing different colored lines

[vlha2281]

I have changed out the magenta imaging unit and the red dots have seemed to disapper, at least for now. However, the yellow is still fading to pink as shown above. I do not have a yellow imaging unit in stock right now, so I cannot replace it at this time.  

[GabiE-Xerox]

Replace if you have one new the magenta unit.

[GabiE-Xerox]

Yes, you can swap them to see if your issue is moving to yellow.

[vlha2281]

also would I change the magenta or the yellow?

[GabiE-Xerox]

Yes

[vlha2281]

is the drum the same as the imagining units

[rdaniels2]

Have you replaced the Drums ?

Here is a link just in case you need it

https://www.office.xerox.com/product-resources/108R00774/enus.html

[GabiE-Xerox]

Hi,

Have you replace the drum?

Gabi

[vlha2281]

I have done the print calibration and it does not help.

[rdaniels2]

It might not be the toners, it could be the drums.

Start with doing a print calibration to see if this helps.