cancel
Showing results for 
Search instead for 
Did you mean: 

Printing tabs and using GBC punch

Jump to solution
Product Name: Other - specify product in post

When i print my xerox tabs and select gbc punch option tab 3 always comes out with 2 holes not punched. Are there any solutions out there?

 

cheerio

MaryScreen Shot 2020-08-25 at 11.16.57 AM.png

0 Kudos
4 Replies
GabiE-Xerox
Xerox Employee
Xerox Employee

Re: Printing tabs and using GBC punch

Jump to solution

Hi,

It can be seen in your picture that punching tabs are not alinged well, so using the small UI on the GBC Pro, change the setting to tab/cover (eg.not 9x12 or 9x11).

 

Gabi

kerrilynsheward
New Member
New Member

Re: Printing tabs and using GBC punch

Jump to solution

Hi there ...

I am having the same issue with the position number 3.  I am running 35 tab book and every position 3 tab is missing two end punch holes.  I have changed the weight and material on the fiery for correct tab stock and weight.  Is there another place to assist?  It is still doing it.  Thanks so much K

0 Kudos

Re: Printing tabs and using GBC punch

Jump to solution

Hi Kerrilyn

sorry, but I was not able to fix my issue or find anyone who could answer my question. I ended up not using the inline GBC punch and bypassed it and punched the book when finihsed out back in our finishing department. 

Cheerio

Mary

0 Kudos
kerrilynsheward
New Member
New Member

Re: Printing tabs and using GBC punch

Jump to solution

Hi Mary

 

Thanks for your response.  I actually was able to fix my issue.  I went to the small interface panel on the punch.  I selected tab/cover instead of 9x12.  In my fiery and on the 280 I made sure I had tab stock selected.  It worked!  So maybe this might help future jobs for you.

 

K