When i print my xerox tabs and select gbc punch option tab 3 always comes out with 2 holes not punched. Are there any solutions out there?
Solved! Go to Solution.
It can be seen in your picture that punching tabs are not alinged well, so using the small UI on the GBC Pro, change the setting to tab/cover (eg.not 9x12 or 9x11).
Hi there ...
I am having the same issue with the position number 3. I am running 35 tab book and every position 3 tab is missing two end punch holes. I have changed the weight and material on the fiery for correct tab stock and weight. Is there another place to assist? It is still doing it. Thanks so much K
sorry, but I was not able to fix my issue or find anyone who could answer my question. I ended up not using the inline GBC punch and bypassed it and punched the book when finihsed out back in our finishing department.
Thanks for your response. I actually was able to fix my issue. I went to the small interface panel on the punch. I selected tab/cover instead of 9x12. In my fiery and on the 280 I made sure I had tab stock selected. It worked! So maybe this might help future jobs for you.