cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Printing to WorkCentre 7535 from MacOS 10.10.2 (Yosemite)

Current versions of the Mac drivers for Xerox 7535 and 5765 workcentres, both of which are on our network, have not been able to print to the 7535, the color machine. We utilize the "standard accounting" credentials. While the drivers work well for the 5765 printer, the color machine prints a standard failure note about unrecognized credentials. This has been true for a couple of years, actually, but until recently, the workaround was to install the drivers from early 2012, version 2.77, instead of the current ones, and they worked well to print to either machine. 

 

Now, however, possibly with the latest upgrade to Yosemite, the installer for 2.77 does not install over the previous drivers, and what ends up installed is version 2.94 of the drivers, which like the current version, do not print to the color 7535.

 

Following one other fix, I fooled my Mac into installing the 2.77 version by changing the "SystemVersion.plist" file, altering the 10.10.2 OS designation to 10.9.5, which worked correctly. However, when I changed it back to 10.10.2 (I had to, because none of the other software worked correctly) the drivers changed to version 2.94 again, and I was back to square 1. 

 

I just installed the latest version (2/26/15) 3.52.0_1481, and this version also doesn't address the color printer. I could really use some help to be able to print to the 7535 on the network from my iMac.

0 Kudos
1 Reply
Highlighted
Community Manager
Community Manager

Re: Printing to WorkCentre 7535 from MacOS 10.10.2 (Yosemite)

Hi rorycooney,

Thank you for using the Support Forum. Please make sure the driver is set for color.  Also check the suggestions presented in this blog article.  If this does not hlep please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos