Our AltaLink C8030 experienced this issue today. It is simply hung on "Please wait...the system is powering up. Do not press the power switch again while power up is in progress." and the 7-segment code on the back is showing 5.
Do we need to replace a component such as the SBC PWB board or try to attempt a USB software ALTBOOT recovery using the download and instructions provided earlier in this thread: Shown here
Any help would be appreciated.
Have you tried calling the billable parts department at 1-800-828-5881.
having a hard time finding a place to order main board for altalink c8070
can you help?
First download the software for AltaLink C8045/55, AltaLink C8030/35, AltaLink C8070.
To prepare the USB thumb drive for an AltBoot restore, create an ALTBOOT folder, in the root directory. The folder name must be all uppercase. Next, using Notepad or similar utility, create a zero-length file in the ALTBOOT folder called FORCED_UPGRADE with no extension. Again, this file must reside in the ALTBOOT folder and be named exactly as shown. Finally, copy the latest firmware file (*.dlm) to the ALTBOOT folder.
Turn the printer Off.
Insert the prepared USB thumb drive in the USB Port on the printer’s rear panel.
Turn the printer On. The printer reads the USB port and begins the restore process.
The splash screen displays the ENERGY STAR logo while the printer reads the thumb drive.
The restore process begins with Check Firmware Version being displayed.
Next, the Software Upgrade screen is displayed. Depending on the system configuration (Trays, Finisher) the process can require approximately 20 minutes. The Software Upgrade screen changes to reflect the current subsystem being restored.
After the firmware update process is complete, the AltBoot Complete screen is displayed instructing you to remove the USB thumb drive.
Remove the USB thumb drive from the printer’s USB Port.
Wait for the printer to reboot and return to Ready To Print.
I've had a feedback today about the Post Code 5 on the 7 segment on the SBC PWB at one client. It was a power surge and the machine doesn't boot up from then.
Thank you for your reply.
We will do so tommorow and let you know the result.