SRA4 folding

[JoeDaft]

Joe. Greatly appreciated as always. Have a nice weekend

[Joe Arseneau · Accepted solution]

With a name like Joe, you are welcome any time ;-)

As for asking too much, Ask a thousand questions nicely and I will source the answer to every single one I can, or others will. but you would probably get much less helpful answers if you were to start just bashing Xerox, the product, the forum or its users. (You certainly haven't done this to be clear and I don't assume you would).

Anyway, here are the specs (Letter/Legal,Tabloid,A3,A4 can be folded)

I attached the CEIG for reference. (Page 21)

And here is where I put in my guess as to why the answer is no to the "Can it fold SRA4" question.

SRAX sizes tend to have 2 decimal places in their sizes, and the hardware in the Finisher is simply not accurate enough to reliably find dead center.

[JoeDaft]

Morning

This forum is a fantastic resource and apologies if asking to much! 😂

As far as I am aware the BR Booklet Finisher can only fold and saddle stitch A4 and A3.

Obviously SRA4 is between the two sizes and I wonder if can possible make the device fold and stitch SRA4?

The driver lets you select SRA4 and appropriate finishing but errors upon output.

Any thoughts?