cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Frequent Member
Frequent Member

Scanner issue

Jump to solution

Nuvera 100EA

FreeFlow Print Server front end

Document handler & Scanner

 

Issue:

when an 8.5 x 14 is placed into document handler to be scanned and printed it shows the incorrect size, in this case 11 x 17, paper choice to use is 8.5 x 14, the result is the image is printing in upper left hand corner of the sheet, 8.5 x 14, and type is cut off.

 

Is this an issue I can solve or is this a call for service?

0 Kudos
2 Replies
Highlighted
Valued Advisor
Valued Advisor

Re: Scanner issue

Jump to solution

Most likely you will need a service tech.

 

Does it only happen with the ADF when doing a scan? Or does that include with Copies? <firmware vs hardware>

 

How about direct off the platen glass? <adf sensor vs scanner sensor>

 

If you set the paper source as legal manually, and the original size as legal manually, does it work then? <just narrows the troubleshooting realistically>

 

 

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
Highlighted
Frequent Member
Frequent Member

Re: Scanner issue

Jump to solution

As of this date it looks like just the ADF is showing the error, off the glass it shows 8.5 x 14.

Cannot chose size when using ADF, under Image Edit...Original...it is set to Automatic and I am unable to change input size

0 Kudos