cancel
Showing results for 
Search instead for 
Did you mean: 
7 Replies
Woliwon
Valued Contributor
Valued Contributor

Re: Selecting output tray

The picture isn't loading on my phone or my laptop. You can try sending it to me by private message if you want?
0 Kudos

Re: Selecting output tray

ok i will re send the picture

 

printerXerox.jpg

0 Kudos
Woliwon
Valued Contributor
Valued Contributor

Re: Selecting output tray

Only if the picture is a yellow triangle lol
0 Kudos

Re: Selecting output tray

why ?

you dont see the picture ?

 

0 Kudos
Woliwon
Valued Contributor
Valued Contributor

Re: Selecting output tray

I don't think your picture loaded properly..
0 Kudos

Re: Selecting output tray

hello 

this is what i see 

Thanks 

printer exerox.png

0 Kudos
Woliwon
Valued Contributor
Valued Contributor

Re: Selecting output tray

You're using the GPD V3 PCL 6? 

 

Open control panel> view devices and printers> view more devices>

Scroll all the way down and choose " more devices and printer settings" which gets you to the windows 10 Devices and Printers page. Right click on the printer and go to printer properties then the administration tab. Make sure your model is chosen under Configurarion. Then close and right click again but choose printing preferences. Output destination should be the bottom option if it is available

0 Kudos

Selecting output tray

Product Name: WorkCentre 7425/7428/7435
Operating System: Windows 10 x64

hello 

i have an issue with my WC 7435 and need to force job on the left side tray when i go in the driver i dont see option to output destination 

i install the pcl6 V3 driver on windows 11 64 Bits 

Thanks 

 

 

0 Kudos