cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Slow Printing with xerox 7545

Hi,

 

our two 7545-Printers interrupts printing often after 5 pages (sometimes after 8 pages).. Then he makes a break of 3 or sometimes 15 seconds and then he prints the rest of the document. Its the same with docs, rtfs and pdfs. The documents are only text-documents. No pictures.

The queue of the Win2008 (64bit) is not the problem.

The printers of other manufacturers works without problems.

 

I have tried every printer driver from the xerox website. PCL and PS. No solution.

 

Who can help?

Thank you.

Peter

0 Kudos
7 Replies
Highlighted
Occasional Advisor
Occasional Advisor

Re: Slow Printing with xerox 7545

What version software is on it?

0 Kudos
Highlighted
New Member
New Member

Re: Slow Printing with xerox 7545

Hi fiery,

 

the version is:     061.121.223.31800

 

thank you.

 

 

0 Kudos
Highlighted
Occasional Advisor
Occasional Advisor

Re: Slow Printing with xerox 7545

I would have a tech come in and do an alt boot software load of the latest spar the one that has the ll patch. If that doesnt work they may have to try an sbc pwb. Keep in mind a new sbc will require a software load.

0 Kudos
Highlighted
New Member
New Member

Re: Slow Printing with xerox 7545

Hi fiery,

 

the technician of Xerox was here and has installed this software to correct the problem.

At the end with no solution he said, this breaks are normal...

 

What is a "sbc pwb"?

 

Thank you.

0 Kudos
Highlighted
Member
Member

Re: Slow Printing with xerox 7545

Have you checked the paper setting? Maybe it is set on thick card stock or labels, that slows the printing down.  You have to change it in the devises and printer section. Once you call up the printer go into properties and then check the paper setting in there.  If you change it back to plain make sure you press apply to save it and then when you print from word or what ever it will always automatically select plain paper.  Hope that may be of some help.

0 Kudos
Highlighted
Occasional Advisor
Occasional Advisor

Re: Slow Printing with xerox 7545

The sbc is the single board controller. I just reread your original post and you said it happens on 2 different machines. So it probably isnt the printers. What operating system are you using? Are the files big? Have you tried different workstations? Maybe try lpr or raw printing. Give 2nd level support analyst a call.

0 Kudos
Highlighted
New Member
New Member

Re: Slow Printing with xerox 7545

It is good for those who are facing trouble problem with their xerox printer. It will help them analyse the problem and look for a solution.
0 Kudos