Is there any way to calibrate the machine for 13x19? I have a calibration chart and it works well for 11x17/12x18 but every time (and I print on it a lot) I use 13x19 the print comes out skewed by about 1/16th and it's not that it isn't centered, the 1/16th skew will be mirrored on the bottom from the top...what can I do?
Hi Silverdirect.
Thank you for using the Support Forum. Please make sure you are using paper within the specifications for the machine. Load the paper with the paper guides lightly touching the edges of the paper. Please also take a look at the solutions for skewed prints and the solution for performing a manual alignment adjustment. Please consider contacting your support centre for further assistance.