cancel
Showing results for 
Search instead for 
Did you mean: 
silverdirect New Member
New Member

V180 prints skewed on 13x19

Product Name: V180
Operating System: Windows 10 x64

Is there any way to calibrate the machine for 13x19? I have a calibration chart and it works well for 11x17/12x18 but every time (and I print on it a lot) I use 13x19 the print comes out skewed by about 1/16th and it's not that it isn't centered, the 1/16th skew will be mirrored on the bottom from the top...what can I do? 

0 Kudos
1 Reply
Community Manager CherylO-Xerox
Community Manager

Re: V180 prints skewed on 13x19

Hi Silverdirect.

Thank you for using the Support Forum. Please make sure you are using paper within the specifications for the machine.  Load the paper with the paper guides lightly touching the edges of the paper.  Please also take a look at the solutions for skewed prints and the solution for performing a manual alignment adjustment.  Please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos