cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Versant 2100 error 026-401

I am pretty sure I was logged in as admin but I will try it again tomorrow
If I can click on it what should I do next
0 Kudos
barwapk
Valued Member
Valued Member

Re: Versant 2100 error 026-401

Send a printscreen, I dont remember how it's named.

0 Kudos

Re: Versant 2100 error 026-401

Here is the photofiery 6.jpg

0 Kudos
barwapk
Valued Member
Valued Member

Re: Versant 2100 error 026-401

Make sure that ALL of Yours defined papers has a Aligner Roll Presure set to 0. 

Change it and give me a feedback please.

0 Kudos

Re: Versant 2100 error 026-401

The aligner roll pressure is set to zero already
0 Kudos
barwapk
Valued Member
Valued Member

Re: Versant 2100 error 026-401

in every stock You use?
0 Kudos

Re: Versant 2100 error 026-401

Yes
And this error only happens from tray 5,6,7
And I made sure the stock in those trays are at zero
0 Kudos
barwapk
Valued Member
Valued Member

Re: Versant 2100 error 026-401

1. Clean the CIS sensor on registration, I was doing it every week.

2. Remember to restart Stock Libary Manager (close and open) every day before first print. We didnt restart the controler (FreeFlow or EFI), You can turn off printer for a night. 

3. Make a feeding correction, I dont remember how it says but it is in Maintenance/Diagnostics, probably when logged in as a admin.

4. Check if in allingment profiles You have parametrs on max or min. For example if skew is from -2.0 to 2.0 never use 2.0, use 1.9 instead.

5. If above doesnt help delete every stock and allingment profile. As far I know the 026-401 was mainly becose of allingment roller presure on, and You dont need to use this stock to have this error.

 

0 Kudos

Re: Versant 2100 error 026-401

Ok
So basically you are saying it’s a fiery issue rather than the machine ?
0 Kudos

Re: Versant 2100 error 026-401

I chnged the hard drive on the fiery with one that is new software loaded on it with empty stock library

I created a few stocks and rn and it still gave the error

I dont think its a setting issue since thses are new profiles with defult settings 

0 Kudos