Versant180-Where is the setting on the machine (not server) to make it always print on Face-Up m

[Joe Arseneau]

Here are all combinations I know for FujiXerox.

admin/1111

admin/11111

x-admin/1111

x-admin/11111

And of course, the right info fails if you failed properly 3 times, so try rebooting.

[print1510W]

I've tried admin 1111 doesn't work.. :(

[Joe Arseneau]

user is admin

pass is 1111

[print1510W]

Do you know the default Username & Password to be able to enter "Properties"?

CWIS > "Properties" > Services > Print

[Joe Arseneau]

First thing first, I don't have access to a Versant, but do work with FujiXerox products daily (The Versant is one) and I deal with printers that use identical Fiery and Freeflow versions

Anything done for print is done on the DFE (FFPS or Fiery)

Anything done for copies is done at the IOT (copier/printer)

For a Fiery you do this:

FFPS you do this:

Queues , right click the one you want to change and select Properties > Output

For the IOT, anything you change will only apply to copies, not any print job.

As admin go to Machine Status > Tools > System Settings > Copy Service Settings > Copy Defaults

It is I think on page 6 of 9

I do not believe the DMP has such an option, it is typically handled by the media in question, and does not allow you to over-ride it. But if it can be done, it would be either Machine Status > Tools > System Settings > Print Service Settings or via the web page of the Versant DMP ala CWIS > Properties > Services > Print

[print1510W]

Versant180-Where is the setting on the machine (not server) to make it always print on Face-Up mode?

If not possible, is it possible to do so on the DMP?