WC 7220 - Paper trays missing

[Joe Arseneau]

hi SithHunter.

The 7220 has no configurations where there are only 2 trays, which means the driver you are using is not for this printer.

If it is on a Mac I can only assume you are printing with Apples "Generic PS"

If it is a PC it is either a driver that was installed for an older printer and this one was dropped into the same IP address, or a Global Xerox driver set to "Basic Print Mode" instead of the machine model, which happens when using a Global driver older than the product or when the port is wrong and or the SNMP is disabled.

In short, remove the driver in use and get a current one from here

[Kimzi]

Hi, SithHunter!

You have to select how many trays that's installed in ur driver settings.

Go to Start -> Devices and Printers -> Right click and choose Printer Preferences -> Configuration and under installable options you can choose how many "Paper trays" that are installed.

Best Regards

Kimzi

--------------------------------------------
Please remember to select "Accept as Solution" for posts that helped you solve the issue.

[SithHunter]

Hi everybody,

We have a Workcentre 7220 that is becoming a major thorn in my side.

The printer has 5 trays installed (including the bypass) and it sees them all in the device configuration and the web interface; but only the first 2 trays are shown in the driver / printer properties; and as a result, users can't print to paper in those trays either manually or via automatic selection.

Any ideas?