Work Centre 5638

[Kimzi]

No, it's probably because the printer is in the middle of updating, I suggest trying to let it update by connecting it directly to the internet if possible.

If not, you'll probably need an engineer to help you reset the printer.

Best Regards

Kimzi

--------------------------------------------
Please remember to select "Accept as Solution" for posts that helped you solve the issue.

[mistertrb]

Is there a major problem if I put in the IP address and the computer can't go to the Centre Ware on line anymore. It use to pop up and give you a log in, but now it isn't doing anything at all. This is a crazy printer...

[EdithJA]

Have you looked on the Xerox support site?

You can set the printer to auto or manual upgrade so you may consider trying the manual method (listed on the site).

The auto upgrade uses ftp to get the needed files, which would indicate that your network needs to be connected and allow FTP.

It is setup in CentreWare.

The following is the link I found with the info.

http://www.support.xerox.com/support/WC5632_WC5638/support/en_US.html?objGUID=13753

Good luck!

[mistertrb]

Does anyone know how to get this printer from self testing and upgrading continuously?  It is all that it is doing.  I turned it off over the weekend and once I turned it on to print; it keeps doing this self test and upgrading for two days now.  Please help....