WorkCenter 7120 - Red Hat EL 6.1 Problem

[AndrewUSOG0116-xrx]

Red-Hat Unix-based operating systems such as RHLE 6 will want to use the XPAdmin application we supply from our drivers page. You can obtain it here: http://www.support.xerox.com/support/workcentre-7120/file-download/enus.html?operatingSystem=linux&f...

With this, you'll want to download the package, unzip and untar it, then perform the same steps for the Printer Model Package file found here:  http://www.support.xerox.com/support/workcentre-7120/file-download/enus.html?operatingSystem=linux&f...

Once those steps are completed, run the ' xpadmin ' command from within terminal. This will launch a GUI from where you can create print queues for several printer models, including the WorkCentre 7120/7125. 

I hope this answers your question, but if you need additional assistance doing this, feel free to call into support. 

[CherylO-Xerox]

Hello WiglWagl, 

If you have not already resolved this issue, we suggest you search our online knowledgebase for this product: WorkCentre 7120. 

Alternatively, you can visit our Contact Us page for other support options.

[WiglWagl]

Hi,

we have installed a xerox workcenter 7120 on Red Hat EL 6.1 (64bit). What is the best driver for this system? The Problem ist, that a print of 5 pages takes about 5 minutes. Same print on an other printer works fine!

Thanks a lot

Best Regards

Rene