Red-Hat Unix-based operating systems such as RHLE 6 will want to use the XPAdmin application we supply from our drivers page. You can obtain it here: http://www.support.xerox.com/support/workcentre-7120/file-download/enus.html?operatingSystem=linux&f...
With this, you'll want to download the package, unzip and untar it, then perform the same steps for the Printer Model Package file found here: http://www.support.xerox.com/support/workcentre-7120/file-download/enus.html?operatingSystem=linux&f...
Once those steps are completed, run the ' xpadmin ' command from within terminal. This will launch a GUI from where you can create print queues for several printer models, including the WorkCentre 7120/7125.
I hope this answers your question, but if you need additional assistance doing this, feel free to call into support.
Hello WiglWagl,
If you have not already resolved this issue, we suggest you search our online knowledgebase for this product: WorkCentre 7120.
Alternatively, you can visit our Contact Us page for other support options.
Hi,
we have installed a xerox workcenter 7120 on Red Hat EL 6.1 (64bit). What is the best driver for this system? The Problem ist, that a print of 5 pages takes about 5 minutes. Same print on an other printer works fine!
Thanks a lot
Best Regards
Rene