Unfortunately the Image Compression settings didn't resolve this issue. Perhaps there's some other options that might? Is there a way to configure the WC6605 to operate more as a page printer rather than a document printer?
yes, i have also seen that issue on the 6605, tried various settings
what helps, if you print, open xerox print preferences, advaced tab, wit the newer global drivers, there is a setting, image compression
try those settings, and it will improve the print speed
Spooling/Printing PDF files are considerably slower on the Xerox WC6605 than the HP & Brother model printers we replaced. The print job spools slowly, once the document begins printing it takes roughly 3-5 seconds sometimes longer between printing each page. This issue exists only when printing PDF’s, all other jobs are processed accordingly.
OS: Windows 7 64-Bit
Device/Driver Replaced: HP LaserJet Pro MFP M225-M226 PCL 6
Drivers - (List of drivers tested with recommended configuration)
Recommended Configuration- (List of settings recommended by Xerox Support)
Software Settings (Adobe Reader):
The “Recommended Configuration” has been tested on the above list of Drivers via Network & USB connection to the device, the changes made appear to have minimal effect on the overall performance. A combination of Driver & Software settings not listed in the “Recommended Configuration” have also been tested however the performance further declined.
It seems I've tried just about everything to resolve this, Are there any suggestions or perhaps something I'm missing here? Thanks!