cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Workcenter 7765 won't use output tray specified by driver.

Jump to solution

Our Xerox 7765 is giving me some issues. Through the admin panel on the machine I have selected the top right tray for the default output of everything, prints, faxes and copies.

Sometimes our printroom needs to use the machine and doesn't want to have to dig through everyone elses prints to find theirs so I set their driver to print to the bottom right tray.

 

Problem is it still comes out the top right tray. I've checked everything I can think of and couldn't find anything useful. I'd rather not call in our Xerox tech just to sort this out but will as a last resort.

 

Thanks for any help.

0 Kudos
4 Replies
Highlighted
New Member
New Member

Re: Workcenter 7765 won't use output tray specified by driver.

Jump to solution
Quick update, I've tried other computers using different drivers, GPD, PS, PCL6, none of them can specify the lower tray.

If I set documents to copy or print to the lower printer through the admin console then they go there, but then I can't switch to the other tray using the driver.
0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: Workcenter 7765 won't use output tray specified by driver.

Jump to solution

The trays actually have specific purposes, typically there is:

top tray ,no staples ,no hole punch, no Offsetting can go there.

Middle tray is for staples, Offset, Hole punched jobs, use any of these features and you cannot send to the top tray

Bottom tray is for Folded, you cannot send a booklet, half fold job to any other tray and it can't be used without the fold option.

If you don't have the bottom tray the middle and top still have the same limitations.

 

2016-02-12 17.52.45 (Small).jpg

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
Highlighted
New Member
New Member

Re: Workcenter 7765 won't use output tray specified by driver.

Jump to solution
Ah, so if I sent multiple copies of something to be offset it should one out the middle tray? (which I have been calling the bottom tray)
0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: Workcenter 7765 won't use output tray specified by driver.

Jump to solution

Exactly.

 

It's all hardware, Offset is actually the tray moving side to side, only the middle can.

Stapler is also right the on the middle tray exit path.

Folder is at the bottom.

Top ain't got nuthin.

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
0 Kudos