Workcentre 3225 driver

[CherylO-Xerox]

The macOS® Catalina drivers continue to be released.  The Catalina driver for the WorkCentre 3215 / 3225 and Phaser 3260 is now available.  If you do not see it listed please select a different language in the language field on the drivers and downloads page and then change back to the language you need and you should see the driver.  This is a cache issue that we are aware of and working but in the meantime, the changing language tip will work. We thank you for your patience and apologize for the delay in releasing the drivers. 

[HorizonTraining · Accepted solution]

I found it on this page:

https://www.support.xerox.com/support/workcentre-3225/downloads/eneg.html?operatingSystem=macOS10_15

It was apparently only uploaded on February 24, and it doesn't show up on the U.S. site, but I downloaded and installed it, and the printer works again!

[CathyO-Xerox]

Hello desztillacio,

Driver are currently being evaluated for this device. I would check back in about a month to see if they are available then.

You can still add the printer on macOS using the built-in “Generic Postscript PPD”.

[desztillacio]

When can I get the MAC OS Caralina driver for my workcentre 3225 printer?