Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
2 Replies
shaneb
New Member
New Member
‎08-21-2017 08:10 PM

Re: Workcentre 3550 paper tray won't detect paper

Just following up on this one. In the end, I dismantled the printer, and disconnected/reconnected the connector that attaches to the main processor board that contains the wires which connect to the tray 1 empty sensor. Once it was all put back together it was able to detect the paper in the tray again. I guess it was a bad contact somewhere in the connection. 

 

The printer is now able to print again.

 

Shane

Reply
CherylO-Xerox
Valued Advisor
Valued Advisor
‎07-26-2017 03:38 PM

Re: Workcentre 3550 paper tray won't detect paper

Hi Shaneb,

Thank you for using the Support Forum. Please take a look for the instructions for loading the paper tray.  Make sure you have completed all the steps.  Also try removing all the paper from the tray, turn the machine off and then back on.  It should show a message that there is no paper loaded, load the paper and see if it recognizes the paper.  If it still fails please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos
Reply
shaneb
New Member
New Member
‎07-23-2017 10:57 PM

Workcentre 3550 paper tray won't detect paper

Product Name: WorkCentre 3550

Hi all,

 

We have a Workcentre 3550 which presently has an issue where it will no longer detect that it has paper in the main paper tray. I've inspected the paper tray and within the cavity of the printer, but can't see anything obviously wrong. Is there anything I should be looking for? Is this a common fault and easy fixed?

 

Thanks in advance.


Shane

0 Kudos
Reply