cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Workcentre 4150 /XF very slow to print

I have a Workcentre 4150 /XF with 40 GB hard drive.
It is very slow when printing. It takes hours to print
just a 50 page document.

 

What could be the problem? Will it help if I reformat
the printer hard drive fresh to FAT32 with an IDE to USB adapter?

Will I need to install any thing on the hard drive after formatting? 

 

The printer has a Hitachi 40GB hard drive. I also have
a Samsung 40GB hard drive which came off another Workcentre 4150 /X.

 

Also, the printer has 256MB RAM. According, to specs it can take upto 384MB

RAM. The RAM slot on the side is already occupied with 256MB stick. Where

can I put the additional RAM stick?

 

Please post if you know.

Tags (1)
0 Kudos
1 Reply
Highlighted
Community Manager
Community Manager

Re: Workcentre 4150 /XF very slow to print

Hi nivi3,

Thank you for using the Support Forum. Please take a look at the solution for slow priinting.  For your hardware questions please consider contacting your support centre for further assistance.

Thanks,
CherylO-Xerox
Community Manager

Be sure to click Kudos for those who have helped you.
Select Accept as Solution for posts that have helped to solve your issue(s)!

0 Kudos