Any help would be appreciated on this issue. Customer was having problems with machine falling off the network. I installed the latest General Release yesterday which should be fine. Xerox informed me to alt boot the machine. This is the error they are getting.
The following status code(s) was raised on 08/30/11 12:33 PM:
16-568 The Printer Control Language (PCL) printing function has failed. User intervention is required to Power Off/On the machine. Printing can continue using other submission methods; other machine services are unaffected.
To see the current state of the system, go to the webpage of the machine.
This alert message was automatically generated by Xerox WorkCentre XRX0000AADD7238.
System Location: machine location not set
System IP Address: 192.168.0.10
System MAC Address: 00:00:AA:DD:72:38
System Model: Xerox WorkCentre 5775
System Serial Number: XEL544280
Please help with this please.
hello, the general release is not that good... call xerox to obtain : 061.131.221.18200
also in the next week there will be a new firmware out, but will not be posted on the xerox site, also call xerox to obtain that one : 220.127.116.1101