cancel
Showing results for 
Search instead for 
Did you mean: 
Ostar
New Member
New Member

Workcentre 6015 does not accept Xerox Original toner

Jump to solution

Our cyan cartridge is empty. It is part of a set of 4 cartridges that are non-Xerox but they worked fine. We ordered a replacement set of 4 Xerox cartridges. Replacing the Cyan cartdrigde gives us a 093-962, which is really surprising since it is genuine Xerox. After trying the other 3 replacements (yellow, magenta, black) they all produce the non-xerox error. Also tried it from starting the printer empty without cartridges. It seems highly unlikely to me that in a batch of 4 cartridges all 4 are4 defective. Putting the old cartridges back in gives no error, these are accepted but then we are stuck with our empty cyan cartridge...

 

0 Kudos
4 Replies
Joe Arseneau
Valued Advisor
Valued Advisor

Re: Workcentre 6015 does not accept Xerox Original toner

Jump to solution

Machines are sold as open from Xerox.

The first supply you put into them encodes the status/contract/region of the device.

 

So you have regions, which are NA/DMO and Asia pacific

And you have contracts, which are Metered (On a contract with Xerox) and Sold (purchased retail)

 

So you bought from somewhere, used up the original supplies and threw in a 3rd party cartridge, the machine locked itself to the region and contract programmed to that item. And until you can find out what that was, you are pretty much out of luck, it could get costly. Xerox can convert the machine back to open status, but they won't do it for free, and in the case of using a 3rd party, it would likely just get your warranty voided at the same time.

 

More in depth info

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau
NJ
New Member
New Member

Re: Workcentre 6015 does not accept Xerox Original toner

Jump to solution
Exact same story here. Xerox 6015 with 2309 imprints. Replaced yellow cartridge with non xerox and this has worked fine for a while. After CRUM error occurred I again replaced yellow cartridge, this time with xerox original. Now CRUM ID 093-960 error appears and machine is locked and all menus unreachable. TIP: Open and close the rear door makes the menu's accessible again and allows scans to be made to USB, but print jobs and copying get stuck on infinite wait while display shows "[Copying ...]". I am not sure what to do next. Please advise.
0 Kudos
NJ
New Member
New Member

Re: Workcentre 6015 does not accept Xerox Original toner

Jump to solution
PS: now that menu's are accessible the display shows that yellow cartridge is 100%. But machine will not print, neither color or BW. Also have used Admin menu to reset the machine, but no luck.
0 Kudos
NJ
New Member
New Member

Re: Workcentre 6015 does not accept Xerox Original toner

Jump to solution

2nd follow up:

I just found out that workcentre 6015 can be started in diagnostic mode, See: https://www.support.xerox.com/en-us/article/en/1554710

From the main menu one can enter a menu that plots test pages. A test page that displays a grid in black, cyan, yellow and magenta was printed without a problem. This shows that the hardware of the machine is capable of printing. 

I also dit a [All test] (result ok) and  did a reset to factory settings with a menu called [Clear All NVM]. However after restarting the machine I still get the CRUM ID error (despite all toners being original)

0 Kudos