Showing results for 
Search instead for 
Did you mean: 

Workcentre 7125 Toner Dust

I have a workcentre 7125 that seems to have some problem fusing the ink to the paper


I have replaced the transfer belt 

The black ink drum

the cyan drum

yellow drum

magenta drum

black ink toner

cyan toner

magenta toner

yellow toner

the fuser unit


Toner "dust" appears on the back of each printed or copied page and every 2nd or thrid print has a ghosted copy on the bottom of the page.


Any help is appreciated.

0 Kudos
4 Replies
Valued Advisor
Valued Advisor

Re: Workcentre 7125 Toner Dust

When toner is on the back it means the toner has spilled internally, probably on some rollers that will need to be cleaned.


If the fuser was an issue the toner would smear off (not hot enough)on your fingers when you touched the output, or flake off (too hot).


Ghosting would be the belt cleaner

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe Arseneau

Re: Workcentre 7125 Toner Dust

Replaced the belt cleaner. Definitely better but still ghosting a little

0 Kudos
New Member
New Member

Re: Workcentre 7125 Toner Dust

Thanks for these tips! 

Tags (1)
0 Kudos

Re: Workcentre 7125 Toner Dust

Every print ghosts text again. 

0 Kudos