Xerox 3315 how to disable test page printing on startup

[jk.baker@hotmail.com]

Thanks, the same technique works for 3215

[CherylO-Xerox · Accepted solution]

Hi LadyBugs,

Thank you for using the Support Forum. Please follow these instructions to turn off the Configuration page at start up:

Enable or Disable Configuration Page at Start Up

1. Press the [Machine Status] button on the Control Panel.
2. Press the [Up] or [Down] arrow button until "System Setup" is selected, and then press the [OK] button.
   
   NOTE: If prompted, enter the Administrator password. The default password is "1111".
   
   
3. Press the [Up] or [Down] arrow button until "Machine Setup" is displayed, and then press the [OK] button.
4. Press the [Up] or [Down] arrow button until "Configuration Page" is displayed, and then press the [OK] button.
5. Select "On" (enabled) or "Off" (disabled) , and then press the [OK] button.
6. Press the [Stop] button to return to Ready mode.

If this does not resolve the issue please consider contacting your support centre for further assistance.

[LadyBugs]

Hello, I have a Xerox workcentre 3315 that prints a test page each time I power on the printer. How can I disable it? Many thanks