cancel
Showing results for 
Search instead for 
Did you mean: 
enko
New Member
New Member

Xerox 550 - manual duplex printing

Hello,

 

I have a problem to print image at the position that I want to be. Every time it's different.

 

Xerox 550

Fiery 5.2.0.37

0 Kudos
4 Replies
RuiKZ6N6K-xrx
Xerox Analyst
Xerox Analyst

Re: Xerox 550 - manual duplex printing

I suggest the use of tray alignment. Also, after printing the first side, flip the paper so that the same edge is used to load the paper. Regards Rui
Be sure to give out Kudos and select "Accept as Solution"
0 Kudos
PaulSteiner
New Member
New Member

Re: Xerox 550 - manual duplex printing

Tray alignment helps a bit, but with the manual feed tray it automatically shifts (not randmo but consistently) the image almost 5mm to the right when using 12" x 18" stock (225gsm). I can find nowhere to eliminate these 5mm - can you help?
0 Kudos
enko
New Member
New Member

Re: Xerox 550 - manual duplex printing

Its about sliding rollers to coat color, I tested it. It depends on the color cover.

0 Kudos
fiery
Occasional Advisor
Occasional Advisor

Re: Xerox 550 - manual duplex printing

Have a technician adjust the tray 5 registration for all paper weights.

0 Kudos