cancel
Showing results for 
Search instead for 
Did you mean: 

Xerox 560 Fiery printing 11x17 second and subsequent pages skewed

Looking for some advice.  One of our end-users has a problem printing an 11x17" pdf file.  The first page prints correctly, centered.  The second and subsequent pages print skewed, off center and off the page.  I have tried several times to correct this in print settings, pdf settings, and printer settings.  This doesn't happen with other printers.  I'm at a loss and need help.  Has anyone run across this with the new 560?

0 Kudos
3 Replies
Account Deactivated

Re: Xerox 560 Fiery printing 11x17 second and subsequent pages skewed

Hi Tadams.

Thanks for using the forum.

I would recommend that you contact support at 1-800-821-2797 for assistance.  With having the front end there may be more troubleshooting questions before a solution is identified.

 

Please select "Accept Solution" and / or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!
Thanks,
SandyP-Xerox
Moderator
0 Kudos
Highlighted
Analyst Nation Moderator Joe053204-hcl
Analyst Nation Moderator

Re: Xerox 560 Fiery printing 11x17 second and subsequent pages skewed

Does it happen if "Choose paper source by pdf page size" is not selected?

What driver is being used? (Beware the Global driver does not work with this device)

Is there a RIP? (Fiery/Freeflow/Creo)

Does the issue happen from all trays or just one?

Please be sure to select "Accept Solution" and or select the thumbs up icon to enter Kudos for posts that resolve your issues. Your feedback counts!

Joe
0 Kudos
jtamayo New Member
New Member

Re: Xerox 560 Fiery printing 11x17 second and subsequent pages skewed

I have the same problem printing on 13x19. I was told there's a 2mm tolerance on image skew and it can never get dialed-in to zero skew. Is this correct? have anyone exprecienced a 1-2 mm bounce on image both shift and skew?

0 Kudos