Xerox 6027 do not print when enter in standby mode
I'm new to the forum. For a while I have a problem on my xerox 6027. When it enters the second standby mode and I send the printout, the printer turns on again and stays on the current print job and does not print. I have to go to cancel printing manually. I contacted the service and I've also changed the motherboard, but the problem persists. The printer is connected to the network through ethernet. The firmware is updated to the latest version: 02.00.02.30.3836. I would like to know if it is possible to downgrade the firmware, preventing the printer from going into standby through some setting, or if there is another solution and if anyone else finds the same problem. Thank you.