We have a Xerox 6204 wide printer, with 2 roll loaded. In roll one we have a 36 by X” roll and roll 2 we have a 24” by X roll. The utilize software is AutoCAD Architecture 2012.
When trying to print a 24x18 sheet, it send it to roll 2 but flip it in a portrait position instead of the horizontal position, so the print come out on as a 24x24 sheet and a blank space on the side. We need it to come out in as a landscape 36” and the required lent 18”. In addition when we tried to print a 24x36 sheet it select roll 2 with the 24” side coming out first thereby leaving another space on the side. We even removed 36” roll and tried to use roll 1 with 24” roll so we can have a perfect cut without the extra side sheet but it refuse to accept a 24sheet roll to plot a 24x36 paper.
Thank you for using the Support Forum. Please take a look at the solution for jobs printing on the wrong paper size and see if the solution applies to your situation. If this does not help please consider contacting your support centre for further assistance.