Xerox 8825 Windows 7 64 bit driver

[RobinH00d]

It is astounding how xerox cannot and will not put out and instruction pdf for this

I download the 510 drivers and follow the steps (roughly):\

1. Accxes Client Tool v.10.0.4 – installation .exe file located on server S:\
   1. S:\Xerox\AccXES10.0.4-A_HPGL2_ENU.exe
      1. NOTE: HPGL2_ENU driver required!
      2. Extract Files to Temp Folder on C:\

• Run S:\Xerox\Install.exe

1. In Accxes Client Tools > Device Manager > Create New Device >
   1. Device Name = 8825 Scanner
   2. IP Address = 10.1.1.74

• Default Printer = Print to File

1. Default Scanner = 8825 Scanner
2. Disable Driver Signing:
   1. Shift +Restart
   2. Choose and Option = Troubleshoot > Advance Options > Startup Settings
   3. Allow Restart > Select 7) Disable Driver Signature Enforcement

1. Xerox 8825 Driver = xesgdi11.hdi *xesgid#.hdi may vary with AutoCad LT Version
   1. S:\Xerox\xesgdi11.hdi
   2. Copy to C:\programfiles\autodesk\autocad lt 2014\drv\xesgdi11.hdi

1. Install Printer
   1. Open Settings > Devices > Printers & Scanners
   2. Add Printer > The Printer I want isn’t listed
   3. Add a local printer or network printer with manual settings
   4. Create new port > Standard TCP/IP Port
   5. Hostname or IP address = 1.1.74
   6. Install the printer driver > Select Have Disk…
      1. Administration S:\Xerox\Drivers\HPGL2\64Bit\500\ENU\Accxes_500.inf
   7. Run Installer S:\Xerox\Drivers\XFAInstaller.exe

[RobinH00d]

i use 510 driver for the 8825 and follow these steps:

1. Accxes Client Tool v.10.0.4 – installation .exe file located on server S:\
   1. S:\Xerox\AccXES10.0.4-A_HPGL2_ENU.exe
      1. NOTE: HPGL2_ENU driver required!
      2. Extract Files to Temp Folder on C:\

• Run S:\Xerox\Install.exe

1. In Accxes Client Tools > Device Manager > Create New Device >
   1. Device Name = 8825 Scanner
   2. IP Address = 10.1.1.74

• Default Printer = Print to File

1. Default Scanner = 8825 Scanner

1. Disable Driver Signing:
   1. Shift +Restart
   2. Choose and Option = Troubleshoot > Advance Options > Startup Settings
   3. Allow Restart > Select 7) Disable Driver Signature Enforcement

1. Xerox 8825 Driver = xesgdi11.hdi *xesgid#.hdi may vary with AutoCad LT Version
   1. S:\Xerox\xesgdi11.hdi
   2. Copy to C:\programfiles\autodesk\autocad lt 2014\drv\xesgdi11.hdi

1. Install Printer
   1. Open Settings > Devices > Printers & Scanners
   2. Add Printer > The Printer I want isn’t listed
   3. Add a local printer or network printer with manual settings
   4. Create new port > Standard TCP/IP Port
   5. Hostname or IP address = 1.1.74
   6. Install the printer driver > Select Have Disk…
      1. Administration S:\Xerox\Drivers\HPGL2\64Bit\500\ENU\Accxes_500.inf
   7. Run Installer S:\Xerox\Drivers\XFAInstaller.exe

[MSPTestAccount]

Thank you for using the forum.

Have you searched the product knowledgebase for a solution? 

Here is the link to

Xerox 8825 Digital Solution with AccXES Controller serial number EV4:

 http://www.support.xerox.com/support/xerox-8825-printer/support/enus.html?associatedProduct=accxes-c...

And the link to

Xerox 8825 Printer with AccXES Controller serial number N5T:

http://www.support.xerox.com/support/xerox-8825-printer/support/enus.html?associatedProduct=accxes-c...

There may be solutions available that may help.

[Techline2012]

Hello,

I am helping a client get their 8825 with EV4 board setup on Windows 7 x64.

Using AccXES tools 14 and the 510 v14 driver, I have been able to setup the printer and print to it just fine, except that I cannot get it to print raster images.

Does anyone have any idea? Are there any settings to change in the printer configuration / or possibly in AutoCAD 2004?

Any help would be greatly appreciated.

Thanks,

Chris

[citynmb]

Has anyone found a Windows 64Bit Drivers for the 8225 with a  N5T Controller?  I would appreciate any help.

[TFB_Eric]

Has anyone found a Windows 64Bit Drivers for the 8225 with a  N5T Controller?  I have a client who just moved their CAD system to a Win7 64Bit using AutoCAD 64Bit but can no longer use their Xerox 8825 Plotter/Printer.  They need the printing function more than scanning function.

[Deep6r]

John

I'm having the same problem.  I did download & install FreeFlow Accxes Client tools version 14.01.12 (for the HFT serial number, but it's the same file, right ?) and I have scanning and document retrieval functions, but I still can't print.   The 'add a printer' in windows and selecting the 510 series wide format printer w/FF accxess doesn't work.  The setup completes, yet it won't print the test page.  The document in stuck in the printer queue.

I've even tried the same drivers for Vista (32&64 bit)

I have the xerox 8825 serial # N5T w/scanner.  I have computers in my office running either win 7 home premium or win 7 pro

[JohnW-Xerox]

Search for the 510 with a YKE controller. There is a Win7 x64 driver there. The 510 and the 8825 are similar enough that this driver should work.

http://www.support.xerox.com/support/xerox-510-print-system/downloads/enus.html?associatedProduct=ac...

John

[grontmij]

did you ever find windows 7 64 bit drivers for the Xerox 8825?