Xerox ColorQube 9301 - Error code 094-534

[printcolor@email.it]

how much cost to repair that problem error  094-534 for xerox 9201..  thanks for any suggestion

[GabiE-Xerox]

Hi,

If the part was made in 2017 it is possible to have a quality issue.

Gabi

[Paul Lamster]

is there any know issue, whenn replaceing the Drum Drive encoder on the CQ9301 ?

I oder the right one at my dealer with P/N 020K20520 for my CQ9301

but it will not fit, monting is ok, the the Cable have the same connector as the cable that came from the IMU board,

so It can´t fit togehter, because I need an male connector there

[Joe Arseneau]

The 94-534 is caused by the machine comparing the drum drive motor encoder output to the drum position encoder output. When they do not agree, the software will declare the 94-534 Drum Belt Slip error. So a problem with either one of the encoders can cause the problem.  Historically the Drum Position encoder (on the front) has had more issues than the drum drive motor encoder.

Other causes for this fault can be the drum stalling due to a bad transfix roll bearing or a bent transfix roll stripper blade.

So your problem is likely an expensive one

[PedroCamacho]

Hello , 

I have a Xerox ColorQube 9301 with error code 094-534 , at this time does not print and does not copy. 
Needed help. 
What can I do?

Thank you,

Best Regards,

Pedro Camacho .