cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member
New Member

Xerox Phaser 3320 - long time printing via remote

Hello,

 

I've got problem with my new phaser 3320. I have on my location (location 1), 3320 connected via network card. Locally print fine. When i connect via Remote Desktop on my another second location i have problem. Test page prints fine. But larger files are big problem. 2MB document / 1 page prints on my 1 location 30sec. When i open "see whats printing"  (location 1) after click Print on location 2 in column "Size" full size grows very slowly ( from 0 to 1 mb grow in 1sec and then from 1 to 2 mb grow ca 15sec, then after 3-5sec printer turns from "prepreing printing" to "printing" than printing page few secs . after 30sec ive got printed page.


 Tested with PCL6 driver. With PS is a bit faster (ca 5sec faster).

 

My old Lexmark E250dn, which has 1x smaller CPU and severals times smaller MB print in max 3sec!! Difference is that Lexmark starts print when column Size is on ca 1 / 2 MB. Xerox starts when transfer 2 / 2 MB.

 

What to do?

 

sry for my english.

 

Thanks for help!

0 Kudos
2 Replies
Highlighted
New Member
New Member

Re: Xerox Phaser 3320 - long time printing via remote

ok.. now i tested with phaser 6125 and workcentre 3210.. same problem..

general problem with xerox?
0 Kudos
Highlighted
Valued Advisor
Valued Advisor

Re: Xerox Phaser 3320 - long time printing via remote

Heya!

 

Either the problem persist because of the driver install or it could be some networking issue.

 

You can try switching the driver port from LPD to RAW and reverse to see if this helps.

 

Thanks!

0 Kudos