Xerox WC 57XX Firmware Problem

[rajeshrraikar]

thank you very much for helping to resolve my issue,  Actually I don't have any thing related to the copier, in SIM port and tray all are empty.

Purchaised this machine from local refurbished machine dealer this, he is also not having the SIM and related cd files with him.

is there any other way to restore the machine, and also I tried to reach XEROX India by referring the machine serial number, they are not recognising the machine(invalid serial CODE - 3905915087)

I have attached the screen shorts of the error and machine details.

Regards 

Rajesh Raikar

India

[rajeshrraikar]

thank you very much for helping to resolve my issue,  Actually I don't have any thing related to the copier, in SIM port and tray all are empty.

Purchaised this machine from local refurbished machine dealer this, he is also not having the SIM and related cd files with him.

is there any other way to restore the machine, and also I tried to reach XEROX India by referring the machine serial number, they are not recognising the machine(invalid serial CODE - 3905915087)

Regards 

Rajesh Raikar

India

[Joe Arseneau]

You cannot restore it, you did an Altboot. You now need your SIM, or to buy another SIM.

If it isn't in the printer or the SIM storage area in the tray, try finding the documentation and CD's etc etc that came with the device.

[rajeshrraikar]

Hi I have tried the methods you mentioned above to upgrade firmware, 

in xerox WC 7535, now its getting ERROR 341.371.00 SIM Insertion Required, 

I didnot find the sim card in the port and also in tray storage area.

how to restore it to earlier position.

Please suggest the solution 

[Joe Arseneau]

A complete Alt-Boot using DISABLE_DATA_BACKUP and FORCED_UPGRADE should be used to completely wipe the machine clean for a full reload.
a. The Forced Altboot method is done with a USB.
b. On the root of the USB should be a folder called altboot
c. Then inside that folder should be the following

d. Power off the printer, plug in USB, Power on printer. Follow instructions.

USB should be FAT32 (Not NTFS). Create the 2 files with Windows notepad and save with no file extension. Grab the Software file from Xerox.com and just extract the bin file , don't use the zip

[ChrisSchz]

I got problems with the network controller, in Machine Software Versions the network controller is " - " but others controller have versions.

I think is a firmware corrupt, cant assing IP for normal firmware upgrade. How i can do a Forced AltBoot via USB?

Thanks.